Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE HOOD COURTESY SWITCH
RM19Y0E _58 Vehicle Interior _003006 THEFT DETERRENT / KEYLESS ENTRY _0015193 ENGINE HOOD COURTESY SWITCH G

THEFT DETERRENT / KEYLESS ENTRY  ENGINE HOOD COURTESY SWITCH  INSPECTION  


PROCEDURE

Hide 84243 1.INSPECT ENGINE HOOD SWITCH

a.
B149798
0.26,0.354 0.729,0.688 0.469,0.333 10 *a 0.271,1.208 0.792,1.625 0.521,0.417 10 *b 2.344,0.521 2.813,0.948 0.469,0.427 10 *c
*a Not pushed
*b Pushed
*c Component without harness connected
(Engine Hood Switch)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Not pressed Below 1 Ω
1 - 2 Pushed 10 kΩ or higher


If the result is not as specified, replace the engine hood switch.