Home › Vehicle Interior › LIGHTING (INT) › ROOM LIGHT(w/o Intrusion Sensor)
RM19Y0E _58 Vehicle Interior _003007 LIGHTING (INT) _0015200 ROOM LIGHT(w/o Intrusion Sensor) A

LIGHTING (INT)  ROOM LIGHT(w/o Intrusion Sensor)  REMOVAL  


PROCEDURE

Hide 81240D 1.REMOVE NO. 2 ROOM LIGHT ASSEMBLY

a.
E239251
2.448,1.719 2.365,2.135 true 2.49,1.615 2.865,1.927 0.375,0.313 10 *1
*1 Protective Tape


Using a screwdriver with its tip wrapped in protective tape, detach the 4 claws and remove the No. 2 room light lens.


b.
E144573

Remove the 2 screws.


c.
E144574

Disconnect the connector and remove the No. 2 room light housing.


Hide 81240B 2.REMOVE NO. 1 ROOM LIGHT BULB

a.

Remove the No. 1 room light bulb from the No. 2 room light housing.