Home › Vehicle Interior › LIGHTING (INT) › ROOM LIGHT(w/ Intrusion Sensor)
RM19Y0E _58 Vehicle Interior _003007 LIGHTING (INT) _0015204 ROOM LIGHT(w/ Intrusion Sensor) A

LIGHTING (INT)  ROOM LIGHT(w/ Intrusion Sensor)  REMOVAL  


PROCEDURE

Hide 81241A 1.REMOVE NO. 2 ROOM LIGHT LENS

a.
E237990
0.646,1.771 0.771,2.271 true 0.719,2.292 1.146,2.635 0.427,0.344 10 *1
*1 Protective Tape


Using a screwdriver with its tip wrapped in protective tape, detach the 4 claws and remove the No. 2 room light lens.


Hide 81240B 2.REMOVE NO. 1 ROOM LIGHT BULB

a.
E136961

Remove the No. 1 room light bulb from the No. 2 room light assembly.


Hide 81250 3.REMOVE NO. 2 ROOM LIGHT ASSEMBLY

a.
E237991

Remove the 3 screws.


b.

Disconnect the connector and remove the No. 2 room light assembly.