INSPECT INDICATOR/WARNING LIGHT
Check the following indicators and warning lights.
| Indicator/Warning Light | Switch Condition | Specified Condition |
|---|---|---|
| BRAKE warning light | Ignition switch off → ON | Comes on for 3 seconds |
| ABS warning light*1 | ||
| Engine coolant temperature warning light | ||
| SRS warning light*2 | Ignition switch off → ON | Comes on for 6 seconds |
| CHARGE warning light | Ignition switch off → ON | ·
Illuminates when ignition switch turned to ON ·
Turns off when engine started |
| EPS warning light | ||
| MIL |
*1: w/ Anti-lock Brake System
*2: w/ Airbag System
INSPECT SPEEDOMETER
Connect the intelligent tester or Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester or Techstream on.
Enter the following menus: Powertrain / Engine and ECT / Data List.
| Standard Indication | Acceptable Range |
|---|---|
| 40 km/h | 41.7 to 44.3km/h |
| 60 km/h | 61.8 to 65.3 km/h |
| 80 km/h | 81.8 to 86.2 km/h |
| 100 km/h | 102 to 107 km/h |
| 120 km/h | 122.2 to 127.7 km/h |
| 140 km/h | 142.4 to 148.4 km/h |
| 160 km/h | 162.5 to 169.4 km/h |
If the result is not as specified, the speedometer may have a malfunction.
Do not use worn, underinflated or overinflated tires as the speedometer reading will be inaccurate.
Check the deflection width of the speedometer indicator.
Within 0.3°
INSPECT TACHOMETER
Connect the intelligent tester or Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester or Techstream on.
Enter the following menus: Powertrain / Engine and ECT / Data List.
| Standard Indication (rpm) | Acceptable Range
Data in ( ) is for Reference |
|---|---|
| 600 | 500 to 700 |
| 1000 | (900 to 1100) |
| 2000 | (1875 to 2125) |
| 3000 | 2850 to 3150 |
| 4000 | (3850 to 4150) |
| 5000 | 4850 to 5150 |
| 6000 | (5850 to 6150) |
| 7000 | 6850 to 7150 |
If the result is not as specified, the tachometer may have a malfunction.