Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › 2011.11–2015.08
RM19Y0E _58 Vehicle Interior _003008 METER / GAUGE / DISPLAY _0015206 METER / GAUGE SYSTEM C

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  0041  Lost AT-shift Communication with ECT  0042  Lost Proper AT-shift Communication with ECT  


DESCRIPTION

The combination meter assembly receives signals from the TCM through the CAN communication lines.

DTC No. Detection Item DTC Detection Condition Trouble Area
0041 Lost AT-shift Communication with ECT The combination meter assembly does not receive data from the TCM for 1 second or more.
·

CAN communication system

·

TCM

·

Combination meter assembly


0042 Lost Proper AT-shift Communication with ECT The combination meter assembly does not receive proper data from the TCM for 1 second or more.
·

CAN communication system

·

TCM

·

Combination meter assembly



PROCEDURE

1.CONFIRM DTC OUTPUT (CAN COMMUNICATION SYSTEM)
a.

Check DTCs.

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>DIAGNOSIS SYSTEM

OK:

CAN communication system DTC is not output.


Result:
Proceed to
OK
NG




OK

2.CONFIRM DTC OUTPUT (AUTOMATIC TRANSMISSION SYSTEM)

NG

2.CONFIRM DTC OUTPUT (AUTOMATIC TRANSMISSION SYSTEM)
a.

Check DTCs.

Click hereDrivetrain>A4Q AUTOMATIC TRANSMISSION / TRANSAXLE>AUTOMATIC TRANSMISSION SYSTEM>DTC CHECK / CLEAR

OK:

Automatic transmission system DTC is not output.


Result:
Proceed to
OK
NG




OK

REPLACE COMBINATION METER ASSEMBLY

NG