Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › STEERING PAD
RM19Y0E _58 Vehicle Interior _003010 SUPPLEMENTAL RESTRAINT SYSTEMS _0015208 STEERING PAD G

SUPPLEMENTAL RESTRAINT SYSTEMS  STEERING PAD  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 45130 1.CHECK STEERING PAD ASSEMBLY (for Vehicle not Involved in Collision)

a.

Perform a diagnostic system check (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION).


b.

With the steering pad assembly installed to the vehicle, perform a visual check. If there are any defects as mentioned below, replace the steering pad assembly with a new one:

Cuts, minute cracks or marked discoloration on the steering pad assembly top surface or in the grooved portion.


Hide 45130 2.CHECK STEERING PAD ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)

a.

Perform a diagnostic system check (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION).


b.

With the steering pad assembly removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the steering pad assembly or steering wheel with a new one:

·

Cuts, minute cracks or marked discoloration on the steering pad assembly top surface or in the grooved portion.

·

Cracks or other damage to the connectors.

·

Deformation of the steering pad contact plate.

·

Deformation of the steering wheel.


HINT:

There should be no interference between the steering pad assembly and steering wheel, and the clearance should be uniform all the way around when a new steering pad assembly is installed to the steering wheel.


CAUTION:

For removal and installation of the steering pad assembly, be sure to follow the correct procedure.