Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY › 2011.11–2013.04
RM19Y0E _58 Vehicle Interior _003011 SEAT _0015214 FRONT SEAT ASSEMBLY A

SEAT  FRONT SEAT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.


PROCEDURE

Hide 1.INSTALL FRONT SEAT ASSEMBLY

a.

Place the front seat assembly in the cabin.

NOTICE:

Do not damage the body.



b.

Temporarily install the front seat assembly with the 4 bolts


c.
B292396
0.063,0.083 0.438,0.417 0.375,0.333 10 *a 2.5,0.74 2.896,1.083 0.396,0.344 10 1 1.49,1.458 1.865,1.771 0.375,0.313 10 2 1.177,2.74 1.542,3.073 0.365,0.333 10 3 3,2.979 3.354,3.333 0.354,0.354 10 4 0.104,1.792 0.469,2.115 0.365,0.323 10 *b
*a Front Side
*b Rear Side


Tighten the 4 bolts in the sequence shown in the illustration.

Torque:
38 N*m (382 kgf*cm, 27 ft.*lbf)


d.

Install the cap.


Hide 72137B 2.INSTALL FRONT SEAT TRACK COVER

a.

Engage the claw and install the front seat track cover.


Hide 71910A 3.INSTALL FRONT SEAT HEADREST ASSEMBLY

a.

Push in the lock button of the front seat headrest support assembly and install the front seat headrest.