Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY › 2011.11–2013.07
RM19Y0E _58 Vehicle Interior _003011 SEAT _0015216 REAR NO. 2 SEAT ASSEMBLY A

SEAT  REAR NO. 2 SEAT ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 72607 1.INSTALL REAR SEAT CUSHION LOCK STRIKER

a.

Install the rear seat cushion lock striker with the nut and bolt.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


Hide 2.INSTALL REAR NO. 2 SEAT ASSEMBLY

a.

Place the rear No. 2 seat assembly in the cabin.

NOTICE:

Do not damage the vehicle body.



b.
B268783

Engage the lock.


c.

Temporarily install the rear No. 2 seat assembly with the 2 bolts.


d.
B292480
0.335,2.797 0.521,2.958 0.186,0.161 10 1 1.652,3.215 1.838,3.377 0.186,0.161 10 2

Tighten the 2 bolts in the sequence shown in the illustration.

Torque:
38 N*m (382 kgf*cm, 27 ft.*lbf)


e.

Return the rear No. 2 seat back assembly RH and LH.


Hide 79236A 3.INSTALL REAR NO. 2 SEAT LEG COVER

a.

Engage the 8 claws and install the 2 rear No. 2 seat leg covers.


b.

Install the 2 clips.