Wear protective gloves. Sharp surfaces on the No. 2 seat back frame sub-assembly and No. 2 seat cushion spring assembly could cause injuries to your hands.
71485
1.REMOVE NO. 2 SEAT BACK COVER
Remove the 2 screws and the No. 2 seat back cover.
79273
2.REMOVE NO. 2 SEAT HINGE COVER
Use the same procedure as for the No. 2 seat back cover.
71303C
3.REMOVE REAR SEAT BACK HINGE SUB-ASSEMBLY RH
| *1 | Bushing |
Remove the 3 bolts, bushing and the rear seat back hinge sub-assembly RH.
71304B
4.REMOVE REAR NO. 2 SEAT HINGE SUB-ASSEMBLY LH
Use the same procedure as for the rear seat back hinge sub-assembly RH.
5.REMOVE REAR NO. 2 SEAT BACK ASSEMBLY RH
| *1 | Bushing |
Remove the rear No. 2 seat back assembly RH.
Remove the bushing.
6.REMOVE REAR NO. 2 SEAT BACK ASSEMBLY LH
Use the same procedure as for the RH side.
71940A
7.REMOVE REAR SEAT HEADREST ASSEMBLY
| *1 | Lock Button |
Push in the lock button of the rear seat headrest support assembly and remove the rear seat headrest assembly.
Use the same procedure for both sides.
71931C
8.REMOVE REAR NO. 2 SEAT HEADREST SUPPORT ASSEMBLY
Open the fastener.
Disengage the hook and open the No. 2 seat back cover sub-assembly.
Disengage the 2 claws and remove the rear No. 2 seat headrest support assembly.
Use the same procedure for both sides.
71931C
9.REMOVE REAR NO. 2 SEAT HEADREST SUPPORT
Disengage the 2 claws and remove the rear No. 2 seat headrest support.
Use the same procedure for both sides.
79023A
10.REMOVE NO. 2 SEAT BACK COVER SUB-ASSEMBLY RH
Remove the 3 hog rings and the No. 2 seat back cover sub-assembly RH from the No. 2 seat back pad sub-assembly RH.
79023A
11.REMOVE NO. 2 SEAT BACK COVER SUB-ASSEMBLY LH
Use the same procedure as for the RH side.
79275
12.REMOVE NO. 2 SEAT BACK PAD SUB-ASSEMBLY RH
Remove the No. 2 seat back pad sub-assembly RH from the rear No. 2 seat back frame sub-assembly RH.
79275
13.REMOVE NO. 2 SEAT BACK PAD SUB-ASSEMBLY LH
Use the same procedure as for the RH side.
71672
14.REMOVE REAR SEAT BACK SILENCER PAD
Remove the rear seat back silencer pad from the No. 2 seat back pad sub-assembly RH.
Use the same procedure for the LH side and RH side.
71393
15.REMOVE REAR SEAT CUSHION BAND
Remove the screw and the rear seat cushion band.
79382C
16.REMOVE NO. 2 SEAT CUSHION
Remove the 2 screws and the 2 No. 2 seat cushions.
79225B
17.REMOVE REAR NO. 2 SEAT CUSHION LOCK COVER
Remove the 2 screws and the 2 rear No. 2 seat cushion lock covers.
73350
18.REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY
72680C
19.REMOVE REAR NO. 2 SEAT CUSHION LOCK ASSEMBLY
Remove the 2 bolts and the rear No. 2 seat cushion lock assembly.
79205
20.REMOVE NO. 2 SEAT LEG SUB-ASSEMBLY
Remove the 2 tension springs.
| *1 | E Ring |
| *2 | Pin |
Remove the 2 E rings, 2 pins and No. 2 seat leg sub-assembly.
79021A
21.REMOVE NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY
Open the fastener.
Remove the 12 hog rings.
Remove the 6 hog rings and the No. 2 seat cushion cover sub-assembly from the No. 2 seat cushion pad.
79235
22.REMOVE NO. 2 SEAT CUSHION PAD
Remove the No. 2 seat cushion pad from the No. 2 seat cushion spring assembly.
71622A
23.REMOVE REAR SEAT CUSHION SILENCER PAD
Remove the rear seat cushion silencer pad from the No. 2 seat cushion pad.
71308E
24.REMOVE REAR SEAT LEG BRACKET RH
| *1 | E Ring |
| *2 | Bushing |
| *3 | Pin |
Remove the E ring, the 2 bushings, the pin and rear seat leg bracket RH.
71309C
25.REMOVE REAR SEAT LEG BRACKET LH
Use the same procedure as for the RH side.