The procedure described below is for the RH side. Use the same procedure for both the RH and LH side, unless otherwise specified.
1.REMOVE FRONT SEAT ASSEMBLY
(Click here Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY>REMOVAL)
73230
2.REMOVE FRONT SEAT INNER BELT ASSEMBLY (w/o Seat Belt Warning System)
| *1 | Hook and Loop Fastener |
Unfasten the hook and loop fastener and open the front seat cushion cover.
Remove the bolt, the washer and the front seat inner belt assembly.
73230
3.REMOVE FRONT SEAT INNER BELT ASSEMBLY (w/ Seat Belt Warning System)
Disengage the clamp.
Cut the band.
| *1 | Hook and Loop Fastener |
Unfasten the hook and loop fastener and open the front seat cushion cover.
Disengage the clamp.
Remove the bolt, the washer and the front seat inner belt assembly.