Home › Vehicle Interior › SEAT BELT › FRONT SEAT OUTER BELT ASSEMBLY
RM19Y0E _58 Vehicle Interior _003012 SEAT BELT _0015219 FRONT SEAT OUTER BELT ASSEMBLY G

SEAT BELT  FRONT SEAT OUTER BELT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 73210 1.INSPECT FRONT SEAT OUTER BELT ASSEMBLY

a.
B131510
1.448,1.698 2.115,1.698 2.115,1.698 2.031,1.354 true 2.406,0.063 2.823,0.438 0.417,0.375 10 *a 2.146,1.708 2.5,2.01 0.354,0.302 10 *1 0.219,1.094 0.615,1.49 0.396,0.396 10 *b 0.875,0.208 1.25,0.521 0.375,0.313 10 *c
*1 Retractor
*a Unlocked
*b Locked
*c 45°


Before installing the front seat outer belt assembly, check the ELR function.

NOTICE:

Do not disassemble the retractor.


i.

When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

If the result is not as specified, replace the front seat outer belt assembly.