Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR(for 3SZ-VE) › 2011.11–2015.08
RM19Y0E _58 Vehicle Interior _003013 HEATING / AIR CONDITIONING _0015230 COMPRESSOR(for 3SZ-VE) G

HEATING / AIR CONDITIONING  COMPRESSOR(for 3SZ-VE)  INSPECTION  


PROCEDURE

Hide 88320 1.INSPECT COOLER COMPRESSOR ASSEMBLY

a.

Check the operation.

i.

Start the engine.


ii.

Inspect the compressor pulley.

OK:

Compressor shaft rotates along with pulley.




b.
E225535C03
0.094,0.115 0.438,0.458 0.344,0.344 10 *a
*a Component without harness connected
(Magnet Clutch Assembly)


Inspect the cooler compressor.

i.

Disconnect the connector.


ii.

Apply battery voltage to the clutch and check the operation of the clutch.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Body ground
Magnet clutch is engaged


If the result is not as specified, replace the compressor.