1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
16361A
2.REMOVE FAN AND GENERATOR V BELT
88711
3.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the cooler compressor assembly.
Remove the O-ring from the No. 1 cooler refrigerant discharge hose.
Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.
88712D
4.DISCONNECT NO. 1 COOLER REFRIGERANT SUCTION HOSE
Remove the bolt and disconnect the No. 1 cooler refrigerant suction hose from the cooler compressor assembly.
Remove the O-ring from the No. 1 cooler refrigerant suction hose.
Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.
88320
5.REMOVE COOLER COMPRESSOR ASSEMBLY
for RHD:
Disconnect the connector.
Remove the 4 bolts and 3 cooler brackets and cooler compressor assembly.
for LHD:
Disconnect the connector.
Remove the 4 bolts and cooler compressor assembly.