Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR(for K3-VE) › 2011.11–2015.08
RM19Y0E _58 Vehicle Interior _003013 HEATING / AIR CONDITIONING _0015231 COMPRESSOR(for K3-VE) G

HEATING / AIR CONDITIONING  COMPRESSOR(for K3-VE)  INSPECTION  


PROCEDURE

Hide 88320 1.INSPECT COOLER COMPRESSOR ASSEMBLY

a.

Check the operation.

i.

Start the engine.


ii.

Inspect the compressor pulley.

OK:

Compressor shaft rotates along with pulley.




b.
E225535C04
0.083,0.083 0.406,0.438 0.323,0.354 10 *a
*a Component without harness connected
(Magnet Clutch Assembly)


Inspect the cooler compressor assembly.

i.

Disconnect the connector.


ii.

Apply battery voltage to the clutch and check the operation of the clutch.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Body ground
Magnet clutch is engaged


If the result is not as specified, replace the cooler compressor assembly.