Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR(for K3-VE) › 2011.11–2015.08
RM19Y0E _58 Vehicle Interior _003013 HEATING / AIR CONDITIONING _0015231 COMPRESSOR(for K3-VE) A

HEATING / AIR CONDITIONING  COMPRESSOR(for K3-VE)  DISASSEMBLY  


PROCEDURE

Hide 88410 1.REMOVE MAGNET CLUTCH ASSEMBLY

E231811N01
0.917,0.938 1.104,0.271 false 1.146,0.167 2.115,0.552 0.969,0.385 10 SST

a.

Clamp the cooler compressor assembly in a vise.


b.

Using SST, hold the magnet clutch hub.

SST
09985-00040  


c.

Remove the bolt, magnet clutch hub and magnet clutch washer(s).

HINT:

There is no set number of magnet clutch washers since they are used for adjusting.



d.
I102847

Using a snap ring expander, remove the snap ring and magnet clutch rotor.

NOTICE:

Do not damage the seal cover of the bearing when removing the snap ring.



e.
I102848

Using a snap ring expander, remove the snap ring and magnet clutch stator.