Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER(for 3SZ-VE) › 2011.11–2015.08
RM19Y0E _58 Vehicle Interior _003013 HEATING / AIR CONDITIONING _0015232 CONDENSER(for 3SZ-VE) A

HEATING / AIR CONDITIONING  CONDENSER(for 3SZ-VE)  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the LHD and RHD vehicle.

·

The procedure listed below is for the RHD vehicle.



PROCEDURE

Hide 88474 1.INSTALL COOLER DRYER

a.
I105130C03
1.479,1.646 0.896,1.594 false 0.698,1.49 1.208,1.958 0.51,0.469 10 *1
*1 Modulator


Using needle nose pliers, install the cooler dryer onto the modulator.


b.
E101932

Apply sufficient compressor oil to the O-ring and the fitting surface of the cap.

Compressor oil:

ND-OIL 8 or equivalent



c.
I105129C06
1.563,1.208 1.115,1.302 false 1.479,1.698 1.031,1.802 false 0.885,1.229 1.292,1.563 0.406,0.333 10 *1 0.823,1.729 1.271,2.042 0.448,0.313 10 *2
*1 14 mm Straight Hexagon Wrench
*2 Modulator


Using a 14 mm straight hexagon wrench, install the cap into the modulator.

Torque:
2.9 N*m (30 kgf*cm, 26 in.*lbf)