Home › Vehicle Exterior › WINDOW / GLASS › REAR POWER WINDOW SWITCH
RM19Y0E _59 Vehicle Exterior _003016 WINDOW / GLASS _0015251 REAR POWER WINDOW SWITCH G

WINDOW / GLASS  REAR POWER WINDOW SWITCH  INSPECTION  


CAUTION / NOTICE / HINT

HINT:

Use the same procedure for the RH side and LH side.


PROCEDURE

Hide 84810 1.INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY

a.
B252386
0.844,2.469 1.302,2.75 true 1.313,2.24 1.521,2.708 true 1.75,2.24 1.75,2.708 true 1.979,2.719 2.208,2.24 true 2.177,2.74 2.688,2.479 true 0.219,1.76 0.677,2.167 0.458,0.406 10 *a 0.604,2.333 0.948,2.708 0.344,0.375 10 D+ 1.115,2.073 1.646,2.365 0.531,0.292 10 M/D+ 2.094,2.063 2.698,2.354 0.604,0.292 10 M/U+ 2.75,2.375 3.177,2.688 0.427,0.313 10 U+ 1.698,2.052 2.052,2.365 0.354,0.313 10 B
*a Component without harness connected
(Power Window Regulator Switch Assembly)


Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
3 (B) - 2 (M/U+)
5 (D+) - 4 (M/D+)
UP Below 1 Ω
1 (U+) - 2 (M/U+)
4 (M/D+) - 5 (D+)
OFF Below 1 Ω
2 (M/U) - 1 (U+)
4 (M/D+) - 3 (B)
DOWN Below 1 Ω