Home › Vehicle Exterior › WINDOW / GLASS › WINDOW DEFOGGER WIRE
RM19Y0E _59 Vehicle Exterior _003016 WINDOW / GLASS _0015258 WINDOW DEFOGGER WIRE A

WINDOW / GLASS  WINDOW DEFOGGER WIRE  REPAIR  


PROCEDURE

Hide 68131 1.REPAIR DEFOGGER WIRE

B323667
1.708,0.979 1.708,0.333 1.708,0.333 2.042,0.333 true 0.74,1.594 0.74,0.948 0.74,0.948 1.073,0.948 true 0.74,1.281 1.073,1.281 true 2.813,1.115 2.813,1.521 false 2.094,0.26 2.688,0.688 0.594,0.427 10 *a 0.688,1.677 1.354,2.104 0.667,0.427 10 *b 2.74,1.563 3.333,1.99 0.594,0.427 10 *c
*a Repair Point
*b Masking Tape
*c Broken Wire


a.

Clean the broken wire tips with grease, wax and silicone remover.


b.

Place masking tape along both sides of the wire.


c.

Thoroughly mix the repair agent.

DuPont paste:

No. 4817 or equivalent



d.
B323668
1.479,0.969 0.5,0.969 0.5,0.969 0.5,1.438 false 1.708,0.417 1.26,0.417 false 1.031,0.354 1.531,0.677 0.5,0.323 10 *a 0.448,1.5 1.031,1.917 0.583,0.417 10 *b
*a Fine Tip Brush
*b Repair Point


Using a fine tip brush, apply a small amount of the agent to the wire.


e.

After a few minutes, remove the masking tape.

NOTICE:

Do not allow electricity to flow in the defogger wire for at least 24 hours.