Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR SUPPORT
RM19Y0E _59 Vehicle Exterior _003017 DOOR / HATCH _0015265 BACK DOOR SUPPORT A

DOOR / HATCH  BACK DOOR SUPPORT  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for both the RH and LH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 68960 1.REMOVE BACK DOOR STAY ASSEMBLY

a.
B290331
0.74,0.594 0.448,0.844 true 0.865,0.917 0.427,1.531 true 0.25,1.51 0.646,1.854 0.396,0.344 10 *1 0.271,0.802 0.615,1.115 0.344,0.313 10 *2
*1 Protective Tape
*2 Stop ring


Using the screwdriver with its tip wrapped in protective tape, slightly raise the stop ring, as shown in the illustration.


b.

Disengage the ball joint.


c.

Remove the 2 bolts and the back door stay assembly.


Hide 68961 2.REMOVE BACK DOOR STAY BOLT

a.

Remove the back door stay bolt.