Home › Vehicle Exterior › WIPER / WASHER › FRONT WIPER RUBBER › 2011.11–2015.08
RM19Y0E _59 Vehicle Exterior _003019 WIPER / WASHER _0015274 FRONT WIPER RUBBER A

WIPER / WASHER  FRONT WIPER RUBBER  REPLACEMENT  


PROCEDURE

Hide 85212A 1.REMOVE FRONT WIPER BLADE

a.

Raise the front wiper arm away from the front windshield glass.


b.
E236902

Detach the claw and remove the front wiper blade as shown in the illustration.


Hide 85214A 2.REMOVE WIPER RUBBER

a.
E057398

Detach the head part (large side) of the wiper rubber from the wiper blade.


b.
B108991C02
3.333,1.042 3.354,1.042 false 3.292,1.031 2.625,0.354 true 2.625,0.354 2.469,0.354 true 2.292,0.25 2.719,0.615 0.427,0.365 10 *a
*a Head Part (Large Side)


Remove the wiper rubber in the direction indicated by the arrow in the illustration.


c.

Remove the 2 wiper rubber backing plates from the wiper rubber.


Hide 85214A 3.INSTALL WIPER RUBBER

a.
I030020C02
0.76,0.115 1.208,0.458 0.448,0.344 10 *a
*a Curved


Install the 2 backing plates to the rubber.

NOTICE:

Install the backing plates so that they are facing the proper direction.



b.
B108990C02
3.292,1.031 3.063,0.469 true 3.063,0.469 2.875,0.469 true 2.646,0.385 2.833,0.583 0.188,0.198 10 *a
*a Head Part (Large Side)


Install the wiper rubber to the claw of the wiper blade in the direction indicated by the arrow in the illustration.

HINT:

Install the wiper rubber so that the head part (large side) of the wiper rubber faces the arm axle side.



c.
E219600

Attach the head part (large side) of the wiper rubber to the rear end side claw of the wiper blade.

NOTICE:

Push the wiper blade into the grooves of the wiper rubber so that it is completely attached.



Hide 85212A 4.INSTALL FRONT WIPER BLADE

a.
E236903

Attach the claw to install the front wiper blade.