Use the same procedure for the LHD and RHD vehicle.
The procedure listed below is for the RHD vehicle.
84650
1.INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
Engage the claw and install the windshield wiper switch assembly as shown in the illustration.
Connect the connector.
45286B
2.INSTALL UPPER STEERING COLUMN COVER
Engage the claw and install the upper steering column cover.
45287
3.INSTALL LOWER STEERING COLUMN COVER
Engage the 4 claws to install the lower steering column cover.
While turning the steering wheel assembly to the right and left, install the 2 screws.
Install the screw to the lower portion of the lower steering column cover.