Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR(for Rear Side)
RM19Y0E _59 Vehicle Exterior _003019 WIPER / WASHER _0015278 WASHER MOTOR(for Rear Side) A

WIPER / WASHER  WASHER MOTOR(for Rear Side)  INSTALLATION  


PROCEDURE

Hide 85310R 1.INSTALL REAR WASHER MOTOR ASSEMBLY

a.

Install the rear washer motor assembly onto the packing of the windshield washer jar sub-assembly.


Hide 85331 2.INSTALL WINDSHIELD WASHER JAR SUB-ASSEMBLY

a.

Engage the guide and install the windshield washer jar sub-assembly.


b.

Install the 2 bolts.

Torque:
3.4 N*m (35 kgf*cm, 30 in.*lbf)


c.

Connect the 2 connectors and the 2 hoses.


Hide 3.FILL UP WASHER JAR AND PUMP ASSEMBLY WITH WINDSHIELD WASHER FLUID

a.

Fill the windshield washer jar sub-assembly with washer fluid.