85310R
1.INSPECT REAR WASHER MOTOR ASSEMBLY
| *a | Component without harness connected
(Rear Washer Motor Assembly) |
Check the operation of the rear washer motor assembly.
Fill the windshield washer jar sub-assembly with washer fluid.
The operation should be performed with the rear washer motor assembly installed onto the windshield washer jar sub-assembly.
Connect the positive (+) battery lead to terminal 1 and the negative (-) battery lead to terminal 2.
Check that washer fluid flows from the windshield washer jar sub-assembly.
Washer fluid flows from the windshield washer jar sub-assembly.
If the result is not as specified, replace the rear washer motor assembly.