Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY
RM19Y0E _59 Vehicle Exterior _003020 LIGHTING (EXT) _0015284 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81550N 1.INSTALL BACK UP LIGHT BULB

a.
E231758

Install the back up light bulb to the rear combination light socket and wire sub-assembly LH.


b.

Turn the rear combination light socket and wire sub-assembly LH with the back up light bulb in the direction indicated by the arrow in the illustration and install them as a unit.


Hide 81550L 2.INSTALL REAR TURN SIGNAL LIGHT BULB

a.
E231759

Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly LH.


b.

Turn the rear combination light socket and wire sub-assembly LH with the rear turn signal light bulb in the direction indicated by the arrow in the illustration and install them as a unit.


Hide 81550H 3.INSTALL TAIL AND STOP LIGHT BULB

a.
E231760

Install the tail and stop light bulb to the rear combination light socket and wire sub-assembly LH.


b.

Turn the rear combination light socket and wire sub-assembly LH with the tail and stop light bulb in the direction indicated by the arrow and install them as a unit.