Home › Vehicle Exterior › LIGHTING (EXT) › LICENSE PLATE LIGHT ASSEMBLY
RM19Y0E _59 Vehicle Exterior _003020 LIGHTING (EXT) _0015285 LICENSE PLATE LIGHT ASSEMBLY G

LIGHTING (EXT)  LICENSE PLATE LIGHT ASSEMBLY  INSPECTION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81275 1.INSPECT LICENSE PLATE LIGHT SOCKET AND WIRE

a.
E204112
0.135,0.104 0.625,0.51 0.49,0.406 10 *a
*a Component without harness connected
(License Plate Light Assembly)


Measure the voltage according to the value(s) in the table below.

Standard:
Tester Connection Specified Condition
Battery positive (+) → 1
Battery negative (-) → 2
License plate light comes on


HINT:

Use a new bulb or know good one.