Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
64780A
1.REMOVE BACK DOOR TRIM PANEL ASSEMBLY
(Click here Vehicle Exterior>DOOR / HATCH>BACK DOOR>DISASSEMBLY)
69215
2.REMOVE BACK DOOR OUTSIDE HANDLE
(Click here Vehicle Exterior>DOOR / HATCH>BACK DOOR>DISASSEMBLY)
76811A
3.REMOVE BACK DOOR OUTSIDE GARNISH
81270
4.REMOVE LICENSE PLATE LIGHT ASSEMBLY
Disconnect the connector.
Disengage the 2 claws in the order as shown in the illustration and remove the license plate light assembly.