Home › Vehicle Exterior › LIGHTING (EXT) › LICENSE PLATE LIGHT ASSEMBLY
RM19Y0E _59 Vehicle Exterior _003020 LIGHTING (EXT) _0015285 LICENSE PLATE LIGHT ASSEMBLY A

LIGHTING (EXT)  LICENSE PLATE LIGHT ASSEMBLY  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81275 1.REMOVE LICENSE PLATE LIGHT SOCKET AND WIRE

a.
E139615

Turn the license plate light socket and wire with the license plate light bulb in the direction indicated by the arrow in the illustration and remove them as a unit.


Hide 81270B 2.REMOVE LICENSE PLATE LIGHT BULB

a.

Remove the license plate light bulb from the license light socket and wire.