Home › Vehicle Exterior › LIGHTING (EXT) › HIGH MOUNTED STOP LIGHT ASSEMBLY
RM19Y0E _59 Vehicle Exterior _003020 LIGHTING (EXT) _0015286 HIGH MOUNTED STOP LIGHT ASSEMBLY G

LIGHTING (EXT)  HIGH MOUNTED STOP LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81570 1.INSPECT CENTER STOP LIGHT ASSEMBLY

a.
E231768
0.656,1.177 1.385,1.104 true 2.042,1.125 2.865,1.198 true 2.958,1.135 3.313,1.521 0.354,0.385 10 E 0.5,1.115 0.896,1.542 0.396,0.427 10 B 0.198,0.104 0.635,0.479 0.438,0.375 10 *a
*a Component without harness connected
(Center Stop Light Assembly)


Apply battery voltage to the connector and check the LED illumination condition.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 2 (B)
Battery negative (-) → Terminal 1 (E)
LED illuminates


If the result is not as specified, replace the center stop light assembly.