Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › NAME PLATE
RM19Y0E _59 Vehicle Exterior _003022 EXTERIOR PANELS / TRIM _0015299 NAME PLATE A

EXTERIOR PANELS / TRIM  NAME PLATE  INSTALLATION  


PROCEDURE

Hide 75311 1.INSTALL RADIATOR GRILLE (OR FRONT PANEL) EMBLEM (for Back Door)

B270493C02
0.344,4 1.01,4.177 true 2.552,3.74 3.021,3.26 true 3.031,3.177 3.385,3.479 0.354,0.302 10 *1 0.188,3.927 0.625,4.292 0.438,0.365 10 *1
*1 Boss


HINT:

When installing the radiator grille (or front panel) emblem, heat the vehicle body and the radiator grille (or front panel) emblem using a heat light.


Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Symbol Emblem 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the vehicle body or the radiator grille (or front panel) emblem excessively.


a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install a new radiator grille (or front panel) emblem.

i.

Using a heat light, heat the vehicle body and a radiator grille (or front panel) emblem.


ii.

Remove the peeling paper from the face of the radiator grille (or front panel) emblem.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Align the boss positions and install the radiator grille (or front panel) emblem.

HINT:

Press the radiator grille (or front panel) emblem firmly to install it.




Hide 75311 2.INSTALL RADIATOR GRILLE (OR FRONT PANEL) EMBLEM

Hide 75441B 3.INSTALL BACK DOOR NAME PLATE

B323865C02
0.469,1.49 0.865,1.896 0.396,0.406 10 *a 1.094,2.385 1.51,2.729 0.417,0.344 10 *b 2.729,1.521 3.115,1.917 0.385,0.396 10 *c
*a 113.0 mm (4.448 in.)
*b 22.4 mm (0.881 in.)
*c 99.0 mm (3.897 in.)


HINT:

When installing the back door name plate, heat the vehicle body and the symbol emblem using a heat light.


Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Symbol Emblem 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the vehicle body or the back door name plate excessively.


a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install a new back door name plate.

i.

Using a heat light, heat the vehicle body and the back door name plate.


ii.

Remove the peeling paper from the face of the back door name plate.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Install the back door name plate in the position shown in the installation.



Hide 75443 4.INSTALL NO. 3 BACK DOOR NAME PLATE

HINT:

When installing the No. 3 back door name plate, heat the vehicle body and the No. 3 back door name plate using a heat light.


Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Symbol Emblem 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the vehicle body or the No. 3 back door name plate excessively.


a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.
B323866C02
1.563,1.365 2.042,1.76 0.479,0.396 10 *a 2.698,1.417 3.177,1.813 0.479,0.396 10 *b 1.531,2.354 2.01,2.75 0.479,0.396 10 *c 2.198,2.375 2.677,2.771 0.479,0.396 10 *d 0.813,1.49 1.292,1.885 0.479,0.396 10 *e
*a 111.0 mm (4.370 in.)
*b 116.0 mm (4.556 in.)
*c 11.0 mm (0.433 in.)
*d 50.0 mm (1.968 in.)
*e 113.0 mm (4.448 in.)


Install a new No. 3 back door name plate.

i.

Using a heat light, heat the vehicle body and the No. 3 back door name plate.


ii.

Remove the peeling paper from the face of the No. 3 back door name plate.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Install the No. 3 back door name plate in the position as shown in the illustration.



Hide 75444A 5.INSTALL NO. 4 BACK DOOR NAME PLATE

HINT:

When installing the No. 4 back door name plate, heat the vehicle body and the No. 4 back door name plate using a heat light.


Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Symbol Emblem 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the vehicle body or the No. 4 back door name plate excessively.


a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.
B323867C02
2.313,1.521 2.729,1.896 0.417,0.375 10 *a 1.833,2.417 2.25,2.792 0.417,0.375 10 *b 0.75,1.479 1.167,1.854 0.417,0.375 10 *c
*a 116.0 mm (4.566 in.)
*b 50.0 mm (1.968 in.)
*c 112.0 mm (4.409 in.)


Install a new No. 4 back door name plate.

i.

Using a heat light, heat the vehicle body and the No. 4 back door name plate.


ii.

Remove the peeling paper from the face of the No. 4 back door name plate.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Install the No. 4 back door name plate in the position as shown in the illustration.