75311
1.REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM (for Back Door)
When removing the radiator grille (or front panel) emblem, heat the vehicle body and radiator grille (or front panel) emblem using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Symbol Emblem | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body or radiator grille (or front panel) emblem excessively.
| *1 | Protective Tape |
| *2 | Wooden Block |
| *3 | Piano Wire |
| *4 | Boss |
Put protective tape around the radiator grille (or front panel) emblem.
Insert piano wire between the vehicle body and the radiator grille (or front panel) emblem.
Be careful of the boss positions.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the radiator grille (or front panel) emblem to the vehicle body.
Be careful not to damage the vehicle body.
Remove the radiator grille (or front panel) emblem.
75311
2.REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM
75441B
3.REMOVE BACK DOOR NAME PLATE
When removing the back door name plate, heat the vehicle body and the back door name plate using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Symbol Emblem | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body or back door name plate excessively.
| *1 | Protective Tape |
| *2 | Wooden Block |
| *3 | Piano Wire |
Put protective tape around the back door name plate.
Insert piano wire between the vehicle body and back door name plate.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the back door name plate to the vehicle body.
Be careful not to damage the vehicle body.
Remove the back door name plate.
75443
4.REMOVE NO. 3 BACK DOOR NAME PLATE
When removing the No. 3 back door name plate, heat the vehicle body and the No. 3 back door name plate using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Symbol Emblem | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body or the No. 3 back door name plate excessively.
| *1 | Protective Tape |
| *2 | Wooden Block |
| *3 | Piano Wire |
Put protective tape around the No. 3 back door name plate.
Insert piano wire between the vehicle body and the No. 3 back door name plate.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the No. 3 back door name plate to the vehicle body.
Be careful not to damage the vehicle body.
Remove the No. 3 back door name plate.
75444A
5.REMOVE NO. 4 BACK DOOR NAME PLATE
When removing the No. 4 back door name plate, heat the vehicle body and the No. 4 back door name plate using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Symbol Emblem | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body or the No. 4 back door name plate excessively.
| *1 | Protective Tape |
| *2 | Wooden Block |
| *3 | Piano Wire |
Put protective tape around the No. 4 back door name plate.
Insert piano wire between the vehicle body and the No. 4 back door name plate.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the No. 4 back door name plate to the vehicle body.
Be careful not to damage the vehicle body.
Remove the No. 4 back door name plate.