Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY › 2013.07–2015.08
RM19Y0E _58 Vehicle Interior _003011 SEAT _0015215 REAR NO. 1 SEAT ASSEMBLY A

SEAT  REAR NO. 1 SEAT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.


PROCEDURE

Hide 59382A 1.INSTALL REAR SEAT LEG LOCK STRIKER

B364572
0.052,0.083 0.365,0.24 0.313,0.156 10 false *a 0.052,2.406 0.365,2.563 0.313,0.156 10 false *b 0.906,0.688 1.219,0.844 0.313,0.156 10 false 2 2.365,0.708 2.677,0.865 0.313,0.156 10 false 1 0.917,2.875 1.229,3.031 0.313,0.156 10 false 2 2.365,2.896 2.677,3.052 0.313,0.156 10 false 1
*a RH Side
*b LH Side
V100136

Front Side


a.

RH Side

i.

Temporarily install the rear seat leg lock striker with the bolt and nut.


ii.

Tighten the bolt and nut in the sequence shown in the illustration.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)



b.

LH Side

i.

Temporarily install the rear seat leg lock striker with the 2 bolts.


ii.

Tighten the 2 bolts in the sequence shown in the illustration.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)



Hide 59382A 2.INSTALL REAR SEAT LEG LOCK STRIKER (w/ Rear Seat Cushion Cover)

a.
B365051C01
2.344,0.49 2.5,0.688 0.156,0.198 10 false 1 0.917,0.479 1.073,0.677 0.156,0.198 10 false 2
V100136

Front Side


Temporarily install the rear seat leg lock striker with the 2 bolts.


b.

Tighten the 2 bolts in the sequence shown in the illustration.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


Hide 3.INSTALL REAR NO. 1 SEAT ASSEMBLY

a.

Place the rear No. 1 seat assembly in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.

Temporarily install the rear No. 1 seat assembly with the 4 bolts.


c.
B363919
0.5,3.135 0.656,3.333 0.156,0.198 10 false 1 0.073,2.896 0.229,3.094 0.156,0.198 10 false 2 2.333,2.156 2.49,2.354 0.156,0.198 10 false 3 2.656,2.385 2.813,2.583 0.156,0.198 10 false 4

Tighten the 4 bolts in the sequence shown in the illustration.

Torque:
25.5 N*m (260 kgf*cm, 19 ft.*lbf)


Hide 71485B 4.INSTALL REAR SEAT HINGE COVER

a.

Engage the 2 claws to install the rear seat hinge cover.

HINT:

Use the same procedure for the other rear seat hinge covers.