Wear protective gloves. Sharp surfaces on the No. 2 seat back frame sub-assembly and No. 2 seat cushion spring assembly could cause injuries to your hands.
79273
1.REMOVE NO. 2 SEAT HINGE COVER
Remove the 2 screws and No. 2 seat hinge cover.
71485
2.REMOVE REAR SEAT HINGE COVER
Use the same procedure as for the No. 2 seat hinge cover.
71303B
3.REMOVE REAR NO. 2 SEAT HINGE SUB-ASSEMBLY RH
| *1 | Bushing |
Remove the 3 bolts, bushing and rear No. 2 seat hinge sub-assembly RH.
71304B
4.REMOVE REAR NO. 2 SEAT HINGE SUB-ASSEMBLY LH
Use the same procedure as for the RH side.
5.REMOVE REAR NO. 2 SEAT BACK ASSEMBLY RH
| *1 | Bushing |
Remove the rear No. 2 seat back assembly RH.
Remove the bushing.
6.REMOVE REAR NO. 2 SEAT BACK ASSEMBLY LH
Use the same procedure as for the RH side.
71970
7.REMOVE REAR SEAT HEADREST ASSEMBLY
| *1 | Lock Button |
Push in the lock button of the rear No. 2 seat headrest support assembly and remove the rear seat headrest assembly.
Use the same procedure for both sides.
71931C
8.REMOVE REAR NO. 2 SEAT HEADREST SUPPORT ASSEMBLY
| *1 | Hook |
Open the fastener.
Disengage the hook and open the No. 2 seat back cover sub-assembly.
Disengage the 2 claws to remove the rear No. 2 seat headrest support assembly.
Use the same procedure for both sides.
71931C
9.REMOVE REAR NO. 2 SEAT HEADREST SUPPORT
Disengage the 2 claws to remove the rear No. 2 seat headrest support.
Use the same procedure for both sides.
79023
10.REMOVE NO. 2 SEAT BACK COVER SUB-ASSEMBLY RH
Remove the 3 hog rings and No. 2 seat back cover sub-assembly RH from the No. 2 seat back pad sub-assembly RH.
79024
11.REMOVE NO. 2 SEAT BACK COVER SUB-ASSEMBLY LH
Use the same procedure as for the RH side.
79037A
12.REMOVE NO. 2 SEAT BACK PAD SUB-ASSEMBLY RH
Remove the No. 2 seat back pad sub-assembly RH from the No. 2 seat back frame sub-assembly RH.
79038A
13.REMOVE NO. 2 SEAT BACK PAD SUB-ASSEMBLY LH
Use the same procedure as for the RH side.
71672
14.REMOVE REAR SEAT BACK SILENCER PAD B
Remove the rear seat back silencer pad B from the No. 2 seat back pad sub-assembly RH.
Use the same procedure for the LH side and RH side.
71393
15.REMOVE REAR SEAT CUSHION BAND
Remove the screw and rear seat cushion band.
16.REMOVE NO. 2 SEAT CUSHION
Remove the 2 screws and 2 No. 2 seat cushions.
79952
17.REMOVE NO. 2 SEAT CUSHION COVER
Remove the 2 screws and 2 No. 2 seat cushion covers.
73350
18.REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY
72680C
19.REMOVE REAR NO. 2 SEAT CUSHION LOCK ASSEMBLY
Remove the 2 bolts and rear No. 2 seat cushion lock assembly.
79107D
20.REMOVE REAR NO. 2 SEAT LEG SUB-ASSEMBLY
Remove the 2 tension springs.
| *1 | E-Ring |
| *2 | Pin |
Remove the 2 E-rings, 2 pins and rear No. 2 seat leg sub-assembly.
79021A
21.REMOVE NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY
Open the fastener.
Remove the 13 hog rings.
Remove the 6 hog rings and No. 2 seat cushion cover sub-assembly from the No. 2 seat cushion pad sub-assembly.
79035A
22.REMOVE NO. 2 SEAT CUSHION PAD SUB-ASSEMBLY
Remove the No. 2 seat cushion pad sub-assembly from the No. 2 seat cushion spring assembly.
71622A
23.REMOVE REAR SEAT CUSHION SILENCER PAD B
Remove the rear seat cushion silencer pad B from the No. 2 seat cushion pad sub-assembly.
79165
24.REMOVE REAR NO. 2 SEAT LEG BRACKET RH
| *1 | E-Ring |
| *2 | Bushing |
| *3 | Pin |
Remove the E-ring, 2 bushings, pin and rear No. 2 seat leg bracket RH.
79166
25.REMOVE REAR NO. 2 SEAT LEG BRACKET LH
Use the same procedure as for the RH side.