Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY › 2013.07–2015.08
RM19Y0E _58 Vehicle Interior _003011 SEAT _0015216 REAR NO. 2 SEAT ASSEMBLY A

SEAT  REAR NO. 2 SEAT ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 59382A 1.INSTALL REAR SEAT LEG LOCK STRIKER

a.

Temporarily install the rear seat leg lock striker with the 2 bolts.


b.
B365051C01
2.344,0.49 2.5,0.688 0.156,0.198 10 false 1 0.917,0.479 1.073,0.677 0.156,0.198 10 false 2
V100136

Front Side


Tighten the 2 bolts in the sequence shown in the illustration.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


Hide 2.INSTALL REAR NO. 2 SEAT ASSEMBLY

a.

Place the rear No. 2 seat assembly in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.
B268783

Engage the lock.


c.
B364574
0.094,2.427 0.25,2.625 0.156,0.198 10 false 1 0.333,2.792 0.49,2.99 0.156,0.198 10 false 2 1.635,3.198 1.792,3.396 0.156,0.198 10 false 3 1.396,2.833 1.552,3.031 0.156,0.198 10 false 4

Temporarily install the rear No. 2 seat assembly with the 4 bolts.


d.

Tighten the 4 bolts in the sequence shown in the illustration.

Torque:
25.5 N*m (260 kgf*cm, 19 ft.*lbf)


e.

Return the rear No. 2 seat back assembly RH and LH.


Hide 79236A 3.INSTALL NO. 2 SEAT LEG COVER

a.

Engage the 4 claws to install the No. 2 seat leg cover.


b.

Install the clip.

HINT:

Use the same procedure for the other No. 2 seat leg covers.