Home › Vehicle Interior › HEATING / AIR CONDITIONING › FRONT EVAPORATOR TEMPERATURE SENSOR › from 2014.04
RM19Y0E _58 Vehicle Interior _003013 HEATING / AIR CONDITIONING _0015234 FRONT EVAPORATOR TEMPERATURE SENSOR G

HEATING / AIR CONDITIONING  FRONT EVAPORATOR TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 88625 1.INSPECT NO. 1 COOLER THERMISTOR

a.
E248043
0.521,1.177 0.74,0.75 false 1.094,2.729 1.375,2.458 false 0.094,0.063 0.406,0.26 0.313,0.198 10 false *a 0.75,0.635 1.063,0.833 0.313,0.198 10 false *b 0.333,1.74 1.219,1.99 0.885,0.25 10 true *d 2.875,4.198 3.188,4.396 0.313,0.198 10 false *e 1.427,2.344 1.74,2.542 0.313,0.198 10 false *c
*a Component without harness connected
(No. 1 Cooler Thermistor)
*b Sensing Portion
*c Acceptable Range
*d Resistance (kΩ)
*e Temperature (°C [°F])


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 -10°C (14°F) 7.94 to 8.31 kΩ
-5°C (23°F) 6.14 to 6.37 kΩ
0°C (32°F) 4.79 to 4.91 kΩ
5°C (41°F) 3.72 to 3.83 kΩ
10°C (50°F) 2.89 to 3.03 kΩ
15°C (59°F) 2.25 to 2.44 kΩ
20°C (68°F) 1.78 to 1.95 kΩ
25°C (77°F) 1.43 to 1.57 kΩ
30°C (86°F) 1.15 to 1.28 kΩ


NOTICE:
·

Touching the sensor even slightly may change the resistance value. Hold the sensor connector.

·

When measuring the resistance, the temperature of the sensor and the cooler thermistor must be the same.



HINT:

As the temperature increases, the resistance decreases (See the graph).


If the result is not as specified, replace the No. 1 cooler thermistor.