83320
1.REMOVE FUEL SENDER GAUGE ASSEMBLY
2.REMOVE NO. 2 FUEL SUCTION SUPPORT
| *1 | Protective Tape |
Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws to remove the No. 2 fuel suction support.
Do not damage the No. 2 fuel suction support and fuel pump with filter assembly.
3.REMOVE FUEL PUMP CUSHION RUBBER
Remove the fuel pump cushion rubber.
4.REMOVE FUEL PUMP AND FUEL FILTER ASSEMBLY
Disconnect the connector from the fuel pump.
Remove the fuel pump and fuel filter assembly.
Remove the fuel grommet and fuel pump spacer from the fuel pump.
5.REMOVE FUEL PUMP FILTER
| *1 | Clip |
Using a screwdriver, disengage the clip. Then, remove the fuel pump filter from the fuel pump.