1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
88719A
2.REMOVE AIRCONDITIONER PRESSURE SENSOR (for 3 Pin Connector Type)
| *1 | 27 mm Deep Socket Wrench |
Disconnect the airconditioner pressure sensor connector.
Using a 27 mm deep socket wrench, remove the airconditioner pressure sensor.
Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.
88645H
3.REMOVE NO. 1 PRESSURE SWITCH (for 2 Pin Connector Type)
| *1 | 27 mm Deep Socket Wrench |
Disconnect the No. 1 pressure switch connector.
Using a 27 mm deep socket wrench, remove the No. 1 pressure switch.
Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.