88719A
1.INSTALL AIRCONDITIONER PRESSURE SENSOR (for 3 Pin Connector Type)
Sufficiently apply compressor oil to the O-ring and the fitting surface of the new airconditioner pressure sensor.
ND-OIL 8 or equivalent
Using a 27 mm deep socket wrench, install the airconditioner pressure sensor.
Connect the airconditioner pressure sensor.
88645H
2.INSTALL NO. 1 PRESSURE SWITCH (for 2 Pin Connector Type)
Sufficiently apply compressor oil to the O-ring and the fitting surface of the new No. 1 pressure switch.
ND-OIL 8 or equivalent
Using a 27 mm deep socket wrench, install the No. 1 pressure switch.
Connect the No. 1 pressure switch connector.
3.CHARGE REFRIGERANT
4. WARM UP ENGINE
5.INSPECT FOR REFRIGERANT LEAK