Home › Engine / Hybrid System › K3-VE FUEL › FUEL PUMP › 2014.04–2015.08
RM19Y0E _51 Engine / Hybrid System _002972 K3-VE FUEL _0015022 FUEL PUMP A

K3-VE FUEL  FUEL PUMP  DISASSEMBLY  


PROCEDURE

Hide 2.REMOVE NO. 2 FUEL SUCTION SUPPORT

a.
A143977C03
2.167,0.26 1.719,0.698 true 2.177,0.125 2.448,0.344 0.271,0.219 10 *1
*1 Protective Tape


Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws to remove the No. 2 fuel suction support.

NOTICE:

Do not damage the No. 2 fuel suction support and fuel pump with filter assembly.



Hide 3.REMOVE FUEL PUMP CUSHION RUBBER

a.
A142218

Remove the fuel pump cushion rubber.


Hide 4.REMOVE FUEL PUMP AND FUEL FILTER ASSEMBLY

a.
A265518

Disconnect the connector from the fuel pump.


b.

Remove the fuel pump and fuel filter assembly.


c.

Remove the fuel grommet and fuel pump spacer from the fuel pump.


Hide 5.REMOVE FUEL PUMP FILTER

a.
A142220C03
2.052,0.938 2.479,0.698 true 2.49,0.594 2.719,0.792 0.229,0.198 10 *1
*1 Clip


Using a screwdriver, disengage the clip. Then, remove the fuel pump filter from the fuel pump.