Home › Drivetrain › CLUTCH › CLUTCH PEDAL SWITCH › from 2015.08
RM19Y0E _52 Drivetrain _002984 CLUTCH _0192570 CLUTCH PEDAL SWITCH G

CLUTCH  CLUTCH PEDAL SWITCH  INSPECTION  


PROCEDURE

Hide 84520 1.INSPECT CLUTCH START SWITCH ASSEMBLY

a.
C200377C01
2.406,1.49 2.635,1.688 0.229,0.198 10 false *a 2.615,1.729 2.958,1.906 0.344,0.177 10 false ON 3.031,1.729 3.385,1.906 0.354,0.177 10 false OFF
*a 1.5 to 3.5 mm (0.0591 to 0.138 in.)


Measure the resistance according to the value(s) in the table below.

Standard resistance:
Tester Connection Condition Specified Condition
1 - 2 OFF (Shaft not depressed) Below 1 Ω
1 - 2 ON (Shaft depressed) 10 kΩ or more