Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE PEDAL(for RHD) › from 2015.08
RM19Y0E _54 Brake _002993 BRAKE SYSTEM (OTHER) _0015144 BRAKE PEDAL(for RHD) A

BRAKE SYSTEM (OTHER)  BRAKE PEDAL(for RHD)  REMOVAL  


PROCEDURE

Hide 83100 1.REMOVE COMBINATION METER ASSEMBLY

Hide 45287 2.REMOVE LOWER STEERING COLUMN COVER

Hide 84340 3.REMOVE STOP LIGHT SWITCH ASSEMBLY

a.

Disconnect the connector from the stop light switch assembly.


b.
C332209

Turn the stop light switch counterclockwise, and remove it.


Hide 84345 4.REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

a.
C332210

Remove the stop light switch mounting adjuster from the brake pedal support sub-assembly.


Hide 47264D 5.SEPARATE BRAKE MASTER CYLINDER PUSH ROD CLEVIS

a.
C332211

Remove the clip and push rod pin and separate the push rod clevis from the brake pedal.


Hide 55106 6.REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY

a.
C332212C02
3.333,2.167 3.417,2.167 false
V100135

Bolt
V100136

Nut


Remove the bolt and 4 nuts and remove the brake pedal support sub-assembly.


b.
C332213

Remove the bolt and remove the brake pedal mounting bracket.