Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › REAR SPEED SENSOR › from 2015.08
RM19Y0E _54 Brake _002992 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0015140 REAR SPEED SENSOR A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  REAR SPEED SENSOR  REMOVAL  


PROCEDURE

Hide 67918D 1.REMOVE REAR DOOR SCUFF PLATE LH

Hide 67935 2.REMOVE BACK DOOR SCUFF PLATE

Hide 67881A 3.REMOVE BACK DOOR WEATHERSTRIP

Hide 73570 4.SEPARATE REAR NO. 2 OUTER SEAT BELT ASSEMBLY

Hide 64740C 5.REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

Hide 6.REMOVE REAR WHEEL

Hide 89546 7.REMOVE REAR SPEED SENSOR

a.
C248979

Disconnect the clamp from the body.


b.
C248980

Disconnect the speed sensor connector.


c.
C249630

Pull out the grommet from the body.


d.

Remove the bolt and separate the sensor bracket from the body.


e.

Disconnect the 2 clamps from the upper arm.


f.
C332232

Disconnect the 3 clamps from the rear axle housing.


g.

Remove the bolt and rear speed sensor from the rear axle housing.

NOTICE:
·

Keep the speed sensor tip and installation portion free of foreign matter.

·

Remove the speed sensor without turning it from its original installation angle.