Home › Brake › BRAKE SYSTEM (OTHER) › 1NR-VE BRAKE PEDAL(for LHD) › from 2015.08
RM19Y0E _54 Brake _002993 BRAKE SYSTEM (OTHER) _0193169 1NR-VE BRAKE PEDAL(for LHD) A

BRAKE SYSTEM (OTHER)  1NR-VE BRAKE PEDAL(for LHD)  REASSEMBLY  


PROCEDURE

Hide 47121 1.INSTALL BRAKE PEDAL PAD

a.

Install the brake pedal pad onto the brake pedal sub-assembly.


Hide 47131 2.INSTALL STOP LIGHT SWITCH CUSHION

a.

Install the stop light switch cushion onto the brake pedal sub-assembly.


Hide 47101B 3.INSTALL BRAKE PEDAL BUSH

a.
C250937C01
3.177,2.104 3.344,2.104 false
V100135

Lithium soap base glycol grease


Apply lithium soap base glycol grease to 2 brake pedal bushes.


b.

Install the 2 bushes onto the brake pedal sub-assembly.


Hide 47101 4.INSTALL BRAKE PEDAL SUB-ASSEMBLY

a.
C334505C01
3.333,2.167 3.417,2.167 false
V100135

Lithium soap base glycol grease


Apply lithium soap base glycol grease to the brake pedal shaft.


b.

Install the brake pedal sub-assembly onto the pedal support with the brake pedal shaft and nut.

Torque:
19.1 N*m (195 kgf*cm, 14 ft.*lbf)