Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE MASTER CYLINDER(for LHD) › from 2015.08
RM19Y0E _54 Brake _002993 BRAKE SYSTEM (OTHER) _0015145 BRAKE MASTER CYLINDER(for LHD) A

BRAKE SYSTEM (OTHER)  BRAKE MASTER CYLINDER(for LHD)  DISASSEMBLY  


PROCEDURE

Hide 47202 1.REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY

a.
C332957

Fix the brake master cylinder sub-assembly in a vise between aluminum plates.

NOTICE:

Do not overtighten the vise.



b.

Using a pin punch (5 mm) and hammer, tap out the ring pin.


c.

Remove the brake master cylinder reservoir sub-assembly and 2 grommets.


Hide 47230 2.REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

Hide 47299 3.REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER