Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE MASTER CYLINDER(for LHD) › from 2015.08
RM19Y0E _54 Brake _002993 BRAKE SYSTEM (OTHER) _0015145 BRAKE MASTER CYLINDER(for LHD) A

BRAKE SYSTEM (OTHER)  BRAKE MASTER CYLINDER(for LHD)  REASSEMBLY  


PROCEDURE

Hide 47299 1.INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER

Hide 47230 2.INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

Hide 47202 3.INSTALL BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY

a.
C333887C01
3.333,2.167 3.427,2.167 false
V100135

Lithium soap base glycol grease


Apply lithium soap base glycol grease to the 2 grommets and install them onto the master cylinder body.


b.

Install the brake master cylinder reservoir sub-assembly onto the master cylinder body.


c.
C332957

Using a pin punch (5 mm) and hammer, tap in the ring pin.