55950G
1.REMOVE DEFROSTER NOZZLE ASSEMBLY (w/ Heater)
Remove the 3 screws and the defroster nozzle assembly.
55981
2.REMOVE NO. 1 DEFROSTER NOZZLE GARNISH (w/ Heater)
Disengage the 6 claws and 6 guides to remove the No. 1 defroster nozzle garnish.
55086A
3.REMOVE CENTER HEATER TO REGISTER DUCT SUB-ASSEMBLY
Remove the 4 screws and the center heater to register duct sub-assembly.
87223A
4.REMOVE AIR DUCT PAD
for LHD
Remove the 5 air duct pads.
| *1 | Air Duct Pad | *2 | Center Heater to Register Duct Sub-assembly |
Always replace the air duct pad with a new one.
for RHD
Remove the 6 air duct pads.
| *1 | Air Duct Pad | *2 | Center Heater to Register Duct Sub-assembly |
Always replace the air duct pad with a new one.
55650
5.REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY
Remove the 3 screws and the No. 1 instrument panel register assembly.
55660
6.REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
Use the same procedure for the No. 1 instrument panel register assembly.
55356C
7.REMOVE NO. 2 INSTRUMENT PANEL CUSHION
for RHD:
Remove the 2 No. 2 instrument panel cushions.
| *1 | No. 2 Instrument Panel Cushion | *2 | Instrument Panel Sub-assembly |
Always replace the No. 2 instrument panel cushion with a new one.
for LHD:
Remove the 2 No. 2 instrument panel cushions.
| *1 | No. 2 Instrument Panel Cushion | *2 | Instrument Panel Sub-assembly |
Always replace the No. 2 instrument panel cushion with a new one.
55357B
8.REMOVE NO. 3 INSTRUMENT PANEL CUSHION
Remove the No. 3 instrument panel cushion.
| *1 | Instrument Panel Sub-assembly | *2 | No. 3 Instrument Panel Cushion |
Always replace the No. 3 instrument panel cushion with a new one.
55355
9.REMOVE NO. 1 INSTRUMENT PANEL CUSHION
Remove the No. 1 instrument panel cushion.
Always replace the No. 1 instrument panel cushion with a new one.