Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for RHD vehicles.
The procedure described below is for the driver side. Use the same procedure for the front passenger side.
1.REMOVE EXTINGUISHER (w/ Extinguisher)
Remove the extinguisher.
2.REMOVE EXTINGUISHER BRACKET (w/ Extinguisher)
Remove the 2 screws and extinguisher bracket.
71910A
3.REMOVE FRONT SEAT HEADREST ASSEMBLY
| *1 | Lock Button |
Push in the lock button of the front seat headrest support assembly and remove the front seat headrest assembly.
72157A
4.REMOVE FRONT SEAT INNER TRACK COVER
Lift up the seat track adjusting handle and move the front seat assembly to the foremost position.
Disengage the claw to remove the front seat inner track cover.
72157A
5.REMOVE FRONT SEAT OUTER TRACK COVER
Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws to remove the front seat outer track cover.
6.REMOVE FRONT SEAT ASSEMBLY
Disconnect the front seat inner belt assembly connector.
| *a | Front Side |
| *b | Rear Side |
Remove the 2 bolts on the rear side of the front seat assembly.
Lift up the seat track adjusting handle and move the front seat assembly to the rearmost position.
Remove the 2 bolts on the front side of the front seat assembly.
Remove the front seat assembly from the cabin.
Be careful not to damage the vehicle body.