The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.
59382A
1.INSTALL REAR SEAT LEG LOCK STRIKER
| *a | Front of the Vehicle |
| *b | Outside of the Vehicle |
RH Side
Temporarily install the 2 rear seat leg lock strikers with the 2 bolts and 2 nuts.
Tighten the 2 bolts and 2 nuts in the sequence shown in the illustration.
| *a | Front of the Vehicle |
| *b | Outside of the Vehicle |
LH Side
Temporarily install the 2 rear seat leg lock strikers with the 4 bolts.
Tighten the 4 bolts in the sequence shown in the illustration.
2.INSTALL REAR NO. 1 SEAT ASSEMBLY
Place the rear No. 1 seat assembly in the cabin.
Be careful not to damage the vehicle body.
Temporarily install the rear No. 1 seat assembly with the 4 bolts.
Tighten the 4 bolts in the sequence shown in the illustration.
71485B
3.INSTALL REAR SEAT HINGE COVER
Engage the 2 claws to install the rear seat hinge cover.
Use the same procedure for the other rear seat hinge covers.
71940A
4.INSTALL REAR SEAT HEADREST ASSEMBLY
| *1 | Lock Button |
Push in the lock button of the rear seat headrest support assembly and install the 2 rear seat headrest assemblies.