Wear protective gloves. Sharp surfaces on the No. 2 seat back frame sub-assembly and No. 2 seat cushion spring assembly could cause injuries to your hands.
The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.
79273
1.REMOVE NO. 2 SEAT HINGE COVER
Remove the 2 screws and No. 2 seat hinge cover.
71303B
2.REMOVE REAR NO. 2 SEAT HINGE SUB-ASSEMBLY
| *1 | Bushing |
Remove the 3 bolts, bushing and rear No. 2 seat hinge sub-assembly.
71485
3.REMOVE REAR SEAT HINGE COVER
| *1 | Hook and Loop Fastener |
Unfasten the hook and loop the fastener.
Remove the screw and rear seat hinge cover.
4.REMOVE REAR NO. 2 SEATBACK ASSEMBLY
| *1 | Bushing |
Remove the rear No. 2 seatback assembly.
Remove the bushing.
71931C
5.REMOVE REAR NO. 2 SEAT HEADREST SUPPORT ASSEMBLY
| *1 | Fastener |
Open the fastener.
Disengage the hook and open the No. 2 seatback cover sub-assembly.
Disengage the 2 claws to remove the rear No. 2 seat headrest support assembly.
71931C
6.REMOVE REAR NO. 2 SEAT HEADREST SUPPORT
Disengage the 2 claws to remove the rear No. 2 seat headrest support.
79023
7.REMOVE NO. 2 SEATBACK COVER SUB-ASSEMBLY
Remove the 3 hog rings and No. 2 seatback cover sub-assembly from the No. 2 seatback pad sub-assembly.
79037A
8.REMOVE NO. 2 SEATBACK PAD SUB-ASSEMBLY
Remove the No. 2 seatback pad sub-assembly from the No. 2 seatback frame sub-assembly.
71672
9.REMOVE REAR SEATBACK SILENCER PAD B
Remove the rear seatback silencer pad B from the No. 2 seatback pad sub-assembly.
10.REMOVE NO. 2 SEAT CUSHION
Remove the screw and No. 2 seat cushion.
79246
11.REMOVE NO. 2 SEAT LEG COVER
Remove the screw and No. 2 seat leg cover.
72658B
12.REMOVE REAR SEAT LOCK HANDLE KNOB
Disengage the claw to remove the rear seat lock handle knob.
79952
13.REMOVE NO. 2 SEAT CUSHION COVER
Remove the 2 screws and No. 2 seat cushion cover.
Disengage the 2 claws to remove the No. 2 seat cushion cover.
73350
14.REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY
72680B
15.REMOVE REAR NO. 2 SEAT CUSHION LOCK ASSEMBLY
Remove the 2 bolts and rear No. 2 seat cushion lock assembly.
79107D
16.REMOVE REAR NO. 2 SEAT LEG SUB-ASSEMBLY
Remove the tension spring.
| *1 | E-Ring |
| *2 | Pin |
Remove the 2 E-rings, 2 pins and rear No. 2 seat leg sub-assembly.
71393
17.REMOVE REAR SEAT CUSHION BAND
| *1 | Fastener |
Open the fastener.
Pass the rear seat cushion band through the separate type rear seat cushion cover.
Remove the screw and rear seat cushion band.
79165
18.REMOVE REAR NO. 2 SEAT LEG BRACKET RH
| *1 | Spring Nut |
| *2 | Bushing |
| *3 | Pin |
Remove the spring nut, 2 bushings, pin and rear No. 2 seat leg bracket RH.
79166
19.REMOVE REAR NO. 2 SEAT LEG BRACKET LH
| *1 | Spring Nut |
| *2 | Bushing |
| *3 | Pin |
Remove the spring nut, 2 bushings, pin and rear No. 2 seat leg bracket LH.
79021A
20.REMOVE NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY
Remove the 7 hog rings.
Remove the 3 hog rings and No. 2 seat cushion cover sub-assembly from the No. 2 seat cushion pad sub-assembly.
79035A
21.REMOVE NO. 2 SEAT CUSHION PAD SUB-ASSEMBLY
Remove the No. 2 seat cushion pad sub-assembly from the No. 2 seat cushion spring assembly.
71622A
22.REMOVE REAR SEAT CUSHION SILENCER PAD B
Remove the rear seat cushion silencer pad B from the No. 2 seat cushion pad sub-assembly.