Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY › from 2015.08
RM19Y0E _58 Vehicle Interior _003011 SEAT _0015216 REAR NO. 2 SEAT ASSEMBLY A

SEAT  REAR NO. 2 SEAT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.


PROCEDURE

Hide 59382A 1.INSTALL REAR SEAT LEG LOCK STRIKER

a.

Temporarily install the rear seat leg lock striker with the 2 bolts.


b.
B365051C01
2.344,0.49 2.5,0.688 0.156,0.198 10 false 1 0.917,0.479 1.073,0.677 0.156,0.198 10 false 2
V100136

Front Side


Tighten the 2 bolts in the sequence shown in the illustration.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


Hide 2.INSTALL REAR NO. 2 SEAT ASSEMBLY

a.

Place the rear No. 2 seat assembly in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.
B268783

Engage the lock.


c.
B412011N01
0.563,2.792 0.719,2.99 0.156,0.198 10 false 1 0.927,3.104 1.083,3.302 0.156,0.198 10 false 2 1.281,3.042 1.438,3.24 0.156,0.198 10 false 3 1.531,3.208 1.688,3.406 0.156,0.198 10 false 4

Temporarily install the rear No. 2 seat assembly with the 4 bolts.


d.

Tighten the 4 bolts in the sequence shown in the illustration.

Torque:
25.5 N*m (260 kgf*cm, 19 ft.*lbf)


e.

Return the rear No. 2 seat back assembly RH and LH.


Hide 79236A 3.INSTALL NO. 2 SEAT LEG COVER

a.

Engage the 4 claws to install the No. 2 seat leg cover.


b.

Install the clip.

HINT:

Use the same procedure for the other No. 2 seat leg covers.



Hide 71970 4.INSTALL REAR SEAT HEADREST ASSEMBLY

a.
B292457C03
2.198,1.469 2.875,1.021 true 2.875,0.896 3.25,1.208 0.375,0.313 10 *1
*1 Lock Button


Push in the lock button of the rear seat headrest support assembly and install the rear seat headrest assembly.