89953A
1.INSPECT BELT WARNING OCCUPANT DETECTION SENSOR
| *a | Component without harness connected
(Belt Warning Occupant Detection Sensor) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 3 | Front passenger seat occupied | Below 100 Ω |
| 1 - 3 | Front passenger seat not occupied | 1 MΩ or higher |
If the result is not as specified, replace the occupant detection sensor (separate type front seat cushion pad).